like International Crystal on Facebook Join International Crystal on LinkedIn

Infrared Accessories

 

Syringes

Luer lock gas tight and tuberculin syringes are useful tools for filling demountable cells, sealed liquid cells and gas cells.
Availability & Estimated Shipping Date | Order NOW | more info...

Infrared Cell Cleaner

The Infrared Cell Cleaner is an ideal method for removing samples and solvents from sealed liquid cells. This cleaner provides a convenient means for cleaning liquid cells and eliminates the cumbersome use of vacuum pumps and other extraction apparatus.
Availability & Estimated Shipping Date | Order NOW | more info...

Econo Cards

ICL’s popular Econo Cards are an ideal vehicle for mounting KBr pellets and polymer films or for use with disposable polyethylene IR transmission windows.
Availability & Estimated Shipping Date | Order NOW | more info...


Finger Cots

Finger cots are the preferred means for handling all optical windows and cells and for polishing or grinding optical windows. They are reusable, which makes them more economical than gloves.
Availability & Estimated Shipping Date | Order NOW | more info...

PTFE Coated Stainless Steel Micro Spatula

PTFE coated nickel stainless steel micro spatula. For use with KBr and other SpectroGrade™ powders. We have found that this PTFE coated stainless steel spatula is ideal for handling KBr and other SpectroGrade™ powders when pressing pellets.
Availability & Estimated Shipping Date | Order NOW | more info...

Desiccator Jar & Desiccator Cabinet

Desiccator jars are a must in all infrared laboratories. These jars are used for desiccating small samples, optics, cells and other applications. Complete with Bell jar, sealing ring, and polycarbonate cover.
Availability & Estimated Shipping Date | Order NOW | more info...


Magnetic Film Holders, KBr Pellet Holder & Paper Inserts

Magnetic holders are convenient for holding KBr pellets or thin polymer films. They are also useful for mounting a 13mm crystal that has been used as a microscope slide in a standard spectrophotometer sample compartment.
Availability & Estimated Shipping Date | Order NOW | more info...

Tweezers / Forceps & Eye Dropper

Stainless steel forceps with very sharp and fine points are ideal for handling KBr pellets and picking up minute samples. They can be used with micro samples being analyzed with an FTIR microscope or a single bounce HATR micro-sampler such as the Split-Pea™.
Availability & Estimated Shipping Date | Order NOW | more info...

Flow Cell Adapters

ICL offers a variety of Flow Cell adapters that will attach to standard IR liquid cells.
Availability & Estimated Shipping Date | Order NOW | more info...

Infrared Polarizers

Polarizers are useful for enhancing sensitivity in grazing angle measurements using specular reflectance accessories and for molecular orientation studies. Polarizers attenuate radiation from polarized lasers, polarize radiation from unpolarized lasers and can be used in pairs to both polarize and attenuate. ICL wire grid polarizers are available for wavelength ranges from 3µm to 15µm.
Availability & Estimated Shipping Date | Order NOW | more info...

Agate Mortars and Pestles

ICL’s agate mortars and pestles are the ideal tool for grinding a matrix of a solid sample with KBr powder in preparation for making a transparent pellet free from spurious absorption peaks.
Availability & Estimated Shipping Date | Order NOW | more info...

Cuvette Rack

This polypropylene 2 tier rack holds a dozen 10mm lightpath cuvettes. Steam autoclavable at 250°F (121°C). 4 5/8” length x 4 1/4” width x 4 3/8” height.
Availability & Estimated Shipping Date | Order NOW | more info...

FTIR Purge Gas Generators

FTIR instrumentation requires an environment free from water and CO2 to protect the optical and electronic components and to assure high signal to noise ratios. This can be achieved by operating in a nitrogen environment or with a purge gas generator.
Availability & Estimated Shipping Date | Order NOW | more info...

Laboratory Shears

Multipurpose stainless steel shears with large handles, 2” blade and excellent leverage. The lower blade has a serrated edge to avoid slippage. Shears cut a variety of materials including rubber and plastic tubing as well as lightweight sheet metal. Handles autoclavable to 120°C.
Availability & Estimated Shipping Date | Order NOW | more info...

Cuvette Stirrers & Funnels

ICL offers 3 versions of cuvette stirrers.
Availability & Estimated Shipping Date | Order NOW | more info...

Polystyrene Calibration Films on KBr Windows

U.S. Patent No. 6,594,008

In addition to standard polystyrene calibration films, ICL offers several other calibration options. Superior calibrations are performed with radially symmetric films which eliminate the orientation effects of extruded films used for NIST Standard 1921 calibrations.
Availability & Estimated Shipping Date | Order NOW | more info...

European Pharmacopoeia 2.2.24 Reference Standard

ICL's PhEur 2.2.24 Reference Standard is a calibration standard certified to conform to the requirements of Chapter 2.2.24 of the European Pharmacopoeia.
Availability & Estimated Shipping Date | Order NOW | more info...

opticlear

Opticlear™ Optical Cleaning Suspension

Opticlear™ is a suspension based cleaning system that peels contamination off the face of optics. It can be used on both coated and uncoated optics.
Availability & Estimated Shipping Date | Order NOW | more info...

Crystal Polishing Kit

The Crystal Polishing Kit contains everything needed by the spectroscopist for repolishing and buffing most infrared transmission crystals and ATR Prisms including KRS-5.
Availability & Estimated Shipping Date | Order NOW | more info...